Installing Display Bezel (Nontouch) - Dell Latitude 7290 Owner's Manual

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
c. WLAN card
d. WWAN card
e. display assembly
3. To remove the display bezel:
a. Use a plastic scribe, find recess to loosen the bottom edge of the display bezel [1].
b. Loosen the tabs on the edges of the display [2,3,4].
CAUTION: The adhesive used on the LCD bezel to seal it with the LCD itself, pry at edges and work your way
around to release the bezel. Seal can peel the layers up or crack the glass when trying to force pry the two
items apart.
4. Remove the display bezel from the display assembly.

Installing display bezel (nontouch)

NOTE: The display bezel installation procedure is applicable only for nontouch display configuration.
1. Place the display bezel on the display assembly.
2. Press the edges of the display bezel until it clicks onto the display assembly.
NOTE: Adhesive is used to secure the display bezel to the display panel.
3. Install the:
a. display assembly
b. WLAN card
c. WWAN card
Before working inside your computer.
Removing and installing components 33