Manageability; Virtualization Support Screen Options - Dell Latitude 7490 Owner's Manual

Option Description
Enable Fn Key Emulation (default)
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys. The available options are:
● Fn Lock—enabled by default
● Lock Mode Disable/Standard—enabled by default
● Lock Mode Enable/Secondary
Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
Fastboot
● Minimal—enabled by default
● Thorough
● Auto
Allows you to create an extra preboot delay. The options are:
Extended BIOS
● 0 seconds—enabled by default.
POST Time
● 5 seconds
● 10 seconds
● Enable Full Screen Logo—not enabled
Full Screen Log
● Prompt on warnings and errors—enabled by default
Warnings and
● Continue on warnings
errors
● Continue on warnings and errors

Manageability

Option Description
USB provision
Enable USB provision is not selected by default
Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
MEBX Hotkey
● Disabled
—enabled by
default
● Enabled
Default setting: Enabled

Virtualization support screen options

Option Description
This field specifies whether a virtual Machine Monitor (VMM) can utilize the conditional hardware
Virtualization
capabilities provided by Intel Virtualization Technology.
Enable Intel Virtualization Technology—enabled by default.
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
VT for Direct I/O
provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
Trusted
hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization
Execution
Technology, and the Virtualization technology for direct I/O must be enabled to use this feature.
Trusted Execution - disabled by default.
System setup 73