Time Setting; Factory Setting Reset; Remove Device - D-D The Aquarium Solution H2Ocean P4 User Manual

Time setting

The unit should automatically sync to the correct time when setup and keep the correct time during a
power outage. If the time is incorrect and needs to be adjusted tap on 'Time Setting' and select 'Time
Sync'. It is normal for the 'Firmware time' to lag behind the 'App Time' by 1-5 seconds due to the time
taken to process data between the app and the device.
Connect to controller
This option is unused at the moment.
Flow Calibration
Used to calibrate the unit to ensure accurate dosing. Please see Calibration in this manual.
Factory Settings Reset
Use this function to factory reset the unit. This will remove all programmed settings from the unit. To
reset the unit, tap on 'Factory Settings Reset' and select reset. The unit will beep and temporally go
offline. When the status light returns to solid red the unit is reset. This will not remove the unit from
the app or cloud. Do not power off the unit during this process.

Remove Device

To remove the device from the app tap on 'Remove Device' and select remove. The unit will still be
connected to the associated router and the Cloud. The D-D P4 Pro can be added back to a mobile
device with the Kamoer Remote App installed by tapping on the '+' symbol on the devices page and
choosing it from the 'Local Devices'.
18
Version 1.0