Subscribe to Our Youtube Channel
Related Manuals for Petsafe PPA00-11326
Summary of Contents for Petsafe PPA00-11326
- Page 1 Installation Guide PPA00-11326 Big Cat Door Please read this entire guide before beginning.
- Page 2 IMPORTANT SAFETY INFORMATION Explanation of Attention Words and Symbols used in this guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
-
Page 3: Table Of Contents
Our products and training tools enhance the relationship between pets and their owners. If you have any questions about our products or training your pet, please visit our website at www.petsafe.net or contact our Customer Care Center at 1-800-732-2677. -
Page 4: Kit Includes
Kit Includes Interior Frame ⁄ ” (53mm) with flap and Screws (4pcs.) 4-way lock ⁄ ” (45mm) Screws (4pcs.) ⁄ ” (37mm) Tunnel Support Screws (4pcs.) ⁄ ” (15mm) Screws (4pcs.) Cutting Template Exterior Frame Screw Guides (4pcs.) Binder Posts Short Plastic Core Cover (4pcs.) Finishing Plugs... -
Page 5: Key Definitions
2B. Place on a raised level surface such as saw horses. Place interior side of door facing up. Helpful Tip: Clamp down the door to prevent it from moving. NOTE: The Pet Door can be installed with the door hanging based on your skill level. petsafe.com... -
Page 6: Cut Pet Door Opening
2C. Cut out template for Non-Glass Doors. Match the marked lines on the door with the shoulder and center lines on the template. Tape template in place and trace template. Make sure to trace underneath tape and connect the corners. Remove the template and any excess tape from the door. -
Page 7: Fit Core Covers
(frame without the flap). Tunnel support should be facing up. Optional: Use duct tape in the corners of core covers to help secure in place and to improve weather resistance. petsafe.com... -
Page 8: Install Pet Door
Step 5 Install Pet Door Optional: Optional If the door cut-out thickness (T) is 1” (25 mm) or more, insert the screw guides into the screw holes on the backside of the interior frame (frame with flap and 4-way lock). The screw guides help guide the screws through the screw holes from the interior frame to the exterior frame. -
Page 9: Training Pet
Do not use the 4-way lock until your pet is familiar with using the pet door. Helpful Tip: Try treats or toys to encourage your pet to go through the pet door and become comfortable using it. petsafe.com... -
Page 10: Installation In Glass Doors And Windows
Installation in Glass Doors and Windows It is not possible to cut holes in tempered or double pane glass except at the time of manufacture. Consult a professional glazier or glass manufacturer to install the pet door in a glass door or window. The Big Cat Door is also designed for installation in glass windows and doors. -
Page 11: Installation In Walls
Turn the right and left knobs so Turn the right and left knobs to the upright both the knobs and locks are positioned position with the locks positioned away over the flap opening. from the flap opening. petsafe.com... -
Page 12: Replacement Parts And Accessories
One Year Non-Transferrable Limited Warranty This Product has the benefit of a limited manufacturer’s warranty. Complete details of the warranty applicable to this Product and its terms can be found at www.petsafe.net and/or are available by contacting your local Customer Care Center: Radio Systems PetSafe Europe Ltd, 2nd Floor, Elgee Building, Market Square, Dundalk, Co. - Page 13 Should you have any queries or require any further information, please contact our Customer Care Center on 1800 786 608 (Australia) or 0800 543 054 (New Zealand). petsafe.com...
- Page 14 Customer Care Center +1 (800) 732-2677...
- Page 15 petsafe.com...
- Page 16 Radio Systems Corporation 10427 PetSafe Way Knoxville, TN 37932 +1 (800) 732-2677 petsafe.com L400-1581/2 ©2019 Radio Systems Corporation...
Need help?
Do you have a question about the PPA00-11326 and is the answer not in the manual?
Questions and answers