Subscribe to Our Youtube Channel
Related Manuals for Petsafe PPA00-10984
Summary of Contents for Petsafe PPA00-10984
- Page 1 Extreme Weather Pet Door ™ Installation Guide for Small, Medium and Large Please read this entire guide before beginning. Model Numbers: PPA00-10984, PPA00-10985, PPA00-10986...
-
Page 2: Important Safety Information
Important Safety Information Explanation of Attention Words and Symbols used in this guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. - Page 3 • Make sure there is nothing underneath the door where you will be drilling the holes or cutting out opening. • Use a manual screwdriver to tighten screws. Do not overtighten. Overtightening can strip the screws or warp the pet door frame. petsafe.com...
-
Page 4: Tools Needed
Our products and training tools promote a lifestyle of protection, teaching, and love—essentials that influence memories for a lifetime. If you have any questions about our products or training your pet, please visit our website at www.petsafe.com or contact our Customer Care Center at 1-800-732-2677. -
Page 5: Installation Instructions
Large reduce cut-out width by 1” and cut-out height by 1”. NOTICE When applying cutting template there should be a minimum of 3” between the bottom and sides of the door and the outer edge of the cutting template to maintain the structural integrity of the door. petsafe.com... -
Page 6: Cut Pet Door Opening
Step Cut Pet Door Opening 3A Drill ½” holes in inside corners of drawn template. These will be the pilot holes for the saw blade. Helpful Tip: Use both hands to hold drill steady and straight at a 90° angle. 3B Beginning in one of the holes just drilled, cut along the drawn template lines. -
Page 7: Install Pet Door
Use a manual screwdriver to tighten screws. Do not overtighten. Overtightening can strip the screws or warp the pet door frame. Optional Caulk around the exterior frame (frame Optional: with one flap) and inside threshold where core covers meet for weather resistance. petsafe.com... -
Page 8: Train Your Pet
Step Train Your Pet 6A Rehang your door and begin training your pet. It may help for you to be on one side of the door and your pet on the other. Lift or tape open flap and try to talk your pet through the pet door. -
Page 9: Replacement Flaps
Insert support from top of pet door flap. new vinyl flap between flap frame. clamp and flap screw holes in top of frame. The PetSafe ® Interior flap clamp Note: logo should be readable Interior flap has a... -
Page 10: Replacement Parts And Accessories
Follow step 3 under “Vinyl Flap Replacement and Adjustment” on page 9. Replacement Parts and Accessories Replacement flaps can be purchased by visiting www.petsafe.com or by contacting our Customer Care Center at 1-800-732-2677. Part Description Part Number Small Vinyl Replacement Flap... -
Page 11: Terms Of Use And Limitations Of Liability
Radio Systems Corporation reserves the right to change the terms, conditions and notices governing this Product from time to time. If such changes have been notified to you prior to your use of this Product, they shall be binding on you as if incorporated herein. petsafe.com... - Page 12 Radio Systems Corporation 10427 PetSafe Way Knoxville, TN 37932 1-800-732-2677 petsafe.com Y400-1352/2 ©2019 Radio Systems Corporation...
- Page 13 Packaging Documentation and Approval Form DOCUMENT INFORMATION Part Number / Revision: Revision Description: 400-1352/2 removed the extra weatherstripping Created by: Category Contact: Matt Whitacre Nick Frank Initial Release to Production ECO Number: RSC18391 PRINTING SPECIFICATIONS Material: 100g wood free paper Printing/Ink Colors: ...
Need help?
Do you have a question about the PPA00-10984 and is the answer not in the manual?
Questions and answers