Page 1
Extreme Weather Pet Door Installation Guide for Small, Medium and Large Please read this entire guide before beginning. Model Numbers: PPA00-10984, PPA00-10985, PPA00-10986...
Important Safety Information Explanation of Attention Words and Symbols used in this guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Our products and training tools promote a lifestyle of protection, teaching, and love—essentials that infl uence memories for a lifetime. If you have any questions about our products or training your pet, please visit our website at www.petsafe.net or contact our Customer Care Center at 1-800-732-2677.
Installation Instructions IMPORTANT If painting the pet door, it is recommended to paint it prior to the pet door being installed. For best results, use a primer for plastics before applying your paint. Step Determine Pet Door Location 1A Measure and mark your pet’s shoulder height on the door.
(felt strips should face fl ap). Cut marks should be away from fl ap. Optional: Use duct tape in the corners of core covers to help secure in place and to improve weather resistance. Cut off any excess tape. www.petsafe.net...
Step Install Pet Door Before putting away the jigsaw, place the interior frame (frame with double fl ap) inside the cut out and check the fi t. Then, place the exterior frame into the underside of the door to check the fi t. If frames do not fi t inside the opening, you may need to recut to square opening before proceeding with installation.
fl ap and tighten screws in place. Replacement Parts Replacement fl aps can be purchased Plastic Door Size Replacement Flap Part Number by visiting www.petsafe.net or by Small PAC11-11037 contacting our Customer Care Center Medium PAC11-11038 at 1-800-732-2677.
Need help?
Do you have a question about the PPA00-10984 and is the answer not in the manual?
Questions and answers