Extech Instruments CO210 User Manual page 6

P3.0 Real-Time Calendar Clock
Press the ▲ button in P1.
SET button and the meter will access P3.
change the year, press the ▲ or ▼ button. Press the SET button to save the setting and move to
P3. (or press the ESC button to return to P3.
2
Press the ▲ button from P3.
the month, press the ▲ or ▼ button. Press the SET button to save the setting and move to P3.
(or press the ESC button to return to P3.
Press the ▲ button from P3.
the day, press the ▲ or ▼ button. Press the SET button to save the setting and move to P3.
press the ESC button to return to P3.
Press the ▲ button from P3.
change it, press the ▲ or ▼ button. Press the SET button to save the setting and move to P3.
(or press the ESC button to return to P3.
Repeat as above to finish setting P3.
P4.0: Factory Default Reset
Press the ▲ button in P1.0 three times to access P4.0 where you can reset the meter to its
default settings. Press SET and the meter will access P4.1 with a blinking "No". Press the ▲ to
switch the status to 'Yes' and then press either the SET button to confirm and continue or the
ESC button to abort the process.
twice to access P3.
0
, showing the blinking YEAR on the lower left. To
1
to access P3. . The current MONTH setting will blink. To change
1 2
without saving).
0
to access P3. . The current DATE (day) setting will blink. To change
2 3
without saving).
0
to access P3. . The current 12/24-hour clock setting will blink. To
3 4
without saving).
0
(HOURS) and P3.
5
for setting the real-time calendar clock. Press the
0
without saving).
0
(MINUTES)
6
6
(or
4
5
CO210-en-US v1.3 1/21
3