Arcconf Modify - Adaptec RAID 5085 User Manual

arcconf modify

Morphs a logical device from one raid level to another (RAID Level Migration). Expands a
logical device from original to one with larger capacity (Online Capacity Expansion). Can be
used to make mirrored sets.
Syntax
MODIFY <Controller#> FROM <LogicalDrive#>
TO [Options] <Size> <RAID#> <CHANNEL# DRIVE#> [CHANNEL# DRIVE#] [noprompt]
Parameters
Controller# is the controller number
From indicates that the logical drive to be modified will follow
LogicalDrive# is the logical drive number
TO indicates that the modifications will follow
Options:
Stripesize—indicates the stripe size in KB. Options are 16, 32, 64, 128, 256, 512, and 1024.
●
the default is 256KB.
init_priority—is the priority level of the modification. Options are low, med, and high.
●
Legs— is the number of subarrays for a RAID level-50 or RAID level 60 array. Possible
●
values are 2-16 legs and 3-16 drives/leg (to 48 drives maximum).
Size is one of the following values:
MAX indicates that you want to use all available space on the disk.
●
Desired size in MB.
●
RAID# is the RAID level for the logical drive 0, 1, 5, 5EE, or 10.
Note:
The CHANNEL# and DRIVE# parameters is the list of devices that will contain the target
modification object.
Channel# is the channel number for the device.
Drive# is the device_ID (device number) for the device.
Note:
Channel and device_ID are repeatable parameters.
Noprompt is an optional parameter that overrides the user prompt.
Example
ARCCONF MODIFY 1 FROM 1
Chapter 2: Using the Command Line Utility
17
●