Barco CLM W6 User Manual page 47




CLM W6
- If you are using a Notebook:

First, follow the steps above to adjust resolution of the computer.
 Press the appropriate keys listed below for your notebook manu-
facturer to send signal out from notebook to projector. Example:
[Fn]+[F4]
Acer 
Asus 
Dell 
Gateway 
Mac Apple:
System Preference  Display  Arrangement  Mirror display
- If you experience difficulty changing resolutions or your monitor
freezes, restart all equipment including the projector.
- The recommended resolution per projector is the native resolution
so W6 1280 x 800 and HD6 1920 x 1080.
The screen of the Notebook or PowerBook computer is not displaying
your presentation
-
If you are using a Notebook PC
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each of them has a different way to
be reactivated. Please refer to your computer's manual for detailed
information.
Image is unstable or flickering
-
Use "TIMINGS\H PHASE" to correct it.
-
Change the monitor color setting on your computer.
Image has vertical flickering bar
-
Use "AUTO IMAGE" to make an adjustment.
-
Check and reconfigure the display mode of your graphic card to
make it compatible with the projector.
[Fn]+[F5]
[Fn]+[F8]
[Fn]+[F8]
[Fn]+[F4]
5. Appendices
IBM/Lenovo 
HP/Compaq 
NEC 
Toshiba 
[Fn]+[F7]
[Fn]+[F4]
[Fn]+[F3]
[Fn]+[F5]
47