Lamps Menu - Barco CLM W6 User Manual

4.1.5 Lamps Menu

Mode
Set lamp mode of the projector.



Lamps
Select single/dual lamp mode of the projector.


High Altitude
Set high altitude mode on or off.


Power
Set lamp power level of the projector.
Note: Power function will not be available if you have set the lamp to Eco or
Normal modes.


CLM W6
Normal: Default value. When set to normal mode, the wattage of the
lamp will be at 330W.
Eco: When set to eco mode, the wattage of the lamp will be at 280W.
Power: Enable lamp power adjust.
Dual: Default value for this function.
Single: The projector will automatically determine the usage hours for
lamp 1 and lamp 2 and choose the lamp with lower hours for the opera-
tion.
Off: Default value.
On: Set high altitude mode on.
Press the ◄ to decrease the power level.
Press the ► to increase the power level.
4. User Controls
37