Section 6
System
Maintenance
SYSTEM MAINTENANCE
Power Source
This system has been designed to be essentially maintenance free.
The only recommended maintenance is to blow out the power supply once a year. Dirt, grinding dust and other
contaminates can accumulate over time and they deteriorate the power supply's cooling performance.
If the unit is located in a dirty environment the unit should be blown out more frequently.
Standard Drawn Arc Stud Weld Tool (Optional, If used)
Typically, most trouble stems from the stud weld tool. The stud weld tool should be serviced once every quarter. Monthly
service may be required if use is exceptionally heavy. Please refer to the stud weld tool service manual for maintenance
guidelines and instructions.
QuikLinx Weld Tool (Optional, If used)
See the QuikLinx Manual for specific QuikLinx maintenance information.
26