Table of Contents
Advertisement
Unpacking
The unit is shipped bolted to a pallet with 3/8-16 bolts. Use a 9/16 or adjustable wrench to unbolt the
power source from the pallet.
WARNING
The feet may be screwed in until they stop or at any level the user chooses to adjust height.
There is a foot kit (4 feet) included with the shipment in a separate box.
These feet MUST be installed. The power source takes in cool air from
the the bottom pan. If no feet are installed the unit will not properly cool
and can overheat. The feet install into the same 4 holes used to secure
the power source to the pallet.
1 1
Advertisement
Table of Contents
