Starting Icp Storage Manager On Remote Systems; Starting The Full Application; Starting The Agent Only - Adaptec ICP5045BL User Manual

Starting ICP Storage Manager on Remote Systems

The next step is to start ICP Storage Manager on all the remote systems in your storage space.
(For more information about 'remote' systems, see
You can run the full application on each system. Alternatively, if your storage space includes
systems that aren't connected to monitors (and therefore won't require the user interface
described in this User's Guide), you can run the Agent only. You may want to do this if system
resources are limited, or if you want more system resources available for other tasks. (For more
information, see
To start:
The full application, see
●
The Agent only, see
●

Starting the Full Application

To start the full ICP Storage Manager application, follow the instructions in
Logging In on the Local System on page

Starting the Agent Only

To start the ICP Storage Manager Agent only, follow the instructions for your operating
system:
For Windows, see the following section.
●
For Linux or VMWare, see
●
For UnixWare or OpenServer, see
●
Windows
On systems running Windows, the ICP Storage Manager Agent starts automatically when the
system is powered on.
To verify that the Agent is running:
1
Open the Windows Control Panel.
2
Double-click Administrative Tools, then double-click Services.
3
In the list of services, check that the ICP Storage Manager Agent is installed and running. If
it's not, you can choose to restart it.
Linux or VMWare
On systems running Linux or VMWare, the ICP Storage Manager Agent starts automatically
when the system is powered on.
To verify that the Agent is running:
1
Open a shell window.
2
Enter this command:
If the Agent is running, it's listed as sh StorAgnt.sh.
About the ICP Storage Manager Agent on page
Starting and Logging In on the Local System on page
page 32.
29.
page 32.
page 33.
ps -ef | grep StorAgnt.sh
Chapter 3: Building Your Storage Space
page 28.)
17.)
32
●
29.
Starting and