Adaptec ICP5045BL User Manual page 75

ICP Storage Manager prompts you to select the correct number of logical drives.
Number of disk drives required
6
Modify the Advanced Settings, if required. (See
more information.)
7
Click Next to review the RAID Volume settings. To make changes, click Back.
This example shows one RAID Volume ready to be created.
8
Click Apply, then click Yes.
ICP Storage Manager builds the RAID Volume. The configuration is saved on the ICP
controller and on the physical drives. ICP Storage Manager replaces the individual logical
drives with a single RAID Volume in the Logical Devices View.
9
Partition and format your RAID Volume. See
Chapter 6: Modifying Your Direct Attached Storage
Fine-tuning Logical Drives on page 66
RAID Volume replaces the two RAID
5 logical drives shown in
page 37 for more information.
75
●
for
Step 1