15.9
Changing the headlight bulb
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
–
Mount and tighten screws
Guideline
Screw, headlight
mask
–
Mount the brake line and wiring harness in holder
F00604-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
ELECTRICAL SYSTEM 15
4
.
M5
5 Nm (3.7 lbf ft)
5
p. 192)
p. 187)
.
189