Table of Contents
Advertisement
13.2
Adjusting the basic position of the hand brake lever
To reactivate the ABS, the vehicle must be stopped and the igni-
tion switched off. The ABS is reactivated when the vehicle is
switched on again. The ABS warning lamp goes out when you
start off.
Info
The motorcycle has an additional 5-D sensor. The 5-D
sensor makes the ABS control dependent on the angle of
inclination and pitch. This can prevent locking and slip-
ping of the wheels during braking when the vehicle is
inclined (riding in curves) within the physical limitations.
–
Adjust the basic position of the hand brake lever to your hand
size by turning adjusting wheel
Info
Push the hand brake lever forward and turn the
adjusting wheel.
Do not make any adjustments while riding.
H00411-10
BRAKE SYSTEM 13
1
.
137
Advertisement
Table of Contents
