Displays - Genvex OPTIMA 270 Operating Instructions Manual

3. DISPLAYS

Userinterface Optima Basic
Button A:
• Push to activate/deactive
reheater (if connected)
• Push and hold to activate/
deactive humidty control
Button B:
• Push and hold for 5
seconds to reset filter
timer
• Push and hold for 10
seconds to clear errors
and restart system.
Micro USB interface for PC
programming of Optima 270
parameters.
6
LED light indicators
• LED light on indicate that function is enabled / on
• LED light off indicate that function is disabled / off
• LED light blinking indicate that function is active.
For further details on red light alarm codes, please
refer to Troubleshooting section 6
Button D:
• Push to increase fanspeed to
step 3 for 30 minutes (time
adjustable in menu A3).
Button C:
• Push to change fanspeed
• If no LED indicators are on
then fans are switched off