urmet domus 1096 User Manual page 16

Operating features
Zoom movement and focus adjustment of the cameras
The cameras have an Autofocus lens that adjusts the focus of the image autonomously.
It is also possible to move the zoom and manually adjust the focus through the UTC/PTZ interface of the
HVR devices in the Urmet catalogue. The zoom can be moved and the focus can be adjusted using the
arrow keys of the HVR remote control graphic interface. The zoom is adjusted using the UP and DOWN
arrows; the focus is adjusted using the RIGHT and LEFT arrows.
Operations on the optics are also possible using the joystick on the camera cable.
UP
ZOOM IN
THE CENTRAL BUTTON CAN
LEFT RIGHT
BE USED TO RESET THE
FOCUS FOCUS
AUTOFOCUS
- +
DOWN
ZOOM
OUT
Accessing the camera OSD menu
Using the UTC/PTZ interface, through the use of the HVR devices in the Urmet catalogue, the OSD menu
of the cameras can be accessed by pressing the central button of the graphic interface of the HVR remote
control and then scrolling through the menus using the arrow buttons.
Refer to the respective product manuals for using the controls.
For using the 1080P and 1080N series HVRs, refer to the complete manual of these cameras which can be
downloaded from Urmet website (see below).
IR lighting adjustment
A trimmer located on the bottom of the camera, under the protective cap, allows the adjustment of the IR
lighting in case of particular installations where maximum lighting could create reflections on the image.
MENU USE
The camera uses a multi-level menu that allows to enable/disable or change camera settings.
MENUS SYSTEM DESCRIPTION
Once the menu access command has been performed, the access first screen will be displayed.
16
DS1096-118A