Tool And Fastener Specifications; Tool Air Fittings - Paslode T250S-F16P Operating Manual And Tool Schematic

TOOL AND FASTENER SPECIFICATIONS

TOOL SPECIFICATIONS
MODEL NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
OPERATING PRESSURE
FASTENER SPECIFICATIONS
NAIL LENGTH
SHANK DIAMETER

TOOL AIR FITTINGS

This tool uses a 1/4" N.P.T. male plug. The inside diameter should be .28" (7mm)
or larger. The fitting must be capable of discharging tool air pressure when
disconnected from the air supply.
OPERATING AIR PRESSURE:
80 to 120 p.s.i. (5.5 to 8.3 bars). Select the operating air pressure within this range
for best tool performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
T250S-F16P (Part# 515500)
11.6"
2.9"
12.3"
3.9lbs.
80 to 120 p.s.i. (5.5 to 8.3 bars)
1" - 2-½"
16 gauge
:
3