Tool And Fastener Specifications - Paslode F325R Operating Manual And Schematic

TOOL AND FASTENER SPECIFICATIONS

TOOL SPECIFICATIONS
MODEL NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
OPERATING PRESSURE
MAGAZINE TYPE
FASTENER SPECIFICATIONS
NAIL LENGTH
SHANK DIAMETER
TOOL AIR FITTINGS
This tool uses a 3/8" N.P.T. male plug. The tting must be capable of discharging
tool air pressure when disconnected from the air supply.
OPERATING AIR PRESSURE:
90 to120 p.s.i. (6.2 to 8.3 bar). Select the operating air pressure within this range
for best tool performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
F325R (Part# 513000)
12.9"
4.3"
12.3"
5.9 lbs.
90 to 120 p.s.i. (6.2 to 8.3 bar)
30 degree, Single Strip
2" - 3-1/4"
.113 - .131
:
3