Tool And Fastener Specifications - Paslode F325R Operating Manual And Schematic

TOOL AND FASTENER SPECIFICATIONS

TOOL AND FASTENER SPECIFICATIONS
TOOL SPECIFICATIONS
TOOL SPECIFICATIONS
MODEL NO.
MODEL NO.
HEIGHT
HEIGHT
WIDTH
WIDTH
LENGTH
LENGTH
WEIGHT
WEIGHT
OPERATING PRESSURE
OPERATING PRESSURE
MAGAZINE TYPE
MAGAZINE TYPE
FASTENER SPECIFICATIONS
FASTENER SPECIFICATIONS
NAIL LENGTH
NAIL LENGTH
SHANK DIAMETER
SHANK DIAMETER
TOOL AIR FITTINGS
TOOL AIR FITTINGS
This tool uses a 3/8" N.P.T. male plug. The tting must be capable of discharging
This tool uses a 3/8" N.P.T. male plug. The tting must be capable of discharging
tool air pressure when disconnected from the air supply.
tool air pressure when disconnected from the air supply.
OPERATING AIR PRESSURE:
OPERATING AIR PRESSURE:
90 to120 p.s.i. (6.2 to 8.3 bar). Select the operating air pressure within this range
90 to120 p.s.i. (6.2 to 8.3 bar). Select the operating air pressure within this range
for best tool performance.
for best tool performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
F325R (Part# 513000)
F325R (Part# 513000)
12.9"
12.9"
4.3"
4.3"
12.3"
12.3"
5.9 lbs.
5.9 lbs.
90 to 120 p.s.i. (6.2 to 8.3 bar)
90 to 120 p.s.i. (6.2 to 8.3 bar)
30 degree, Single Strip
30 degree, Single Strip
2" - 3-1/4"
2" - 3-1/4"
.113 - .131
.113" - .131"
:
:
3
3