Changing Basic Settings; Setting The Time - Siemens SX57HS01DA User Manual

aus Basic settings
Basic setting
emotionLight
Front display
Start programme
Tone volume
Button volume
Wi-Fi
Remote Start
Greeting
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Press ⁠ .
1.
To open the basic settings, press
2.
for approx. 3 seconds.
Press repeatedly until the display
3.
shows the required setting.
Press or
4.
display shows the right value.
You can change several settings.
38
Selection
off
On via main switch
On on opening door
1
on
off
Auto 45-65°
Last selected
1
programme
Scale with multiple
levels.
Scale with multiple
levels
on
off
off
Manual
Permanent
1
on
off
Reset
repeatedly until the
Description
Switch the interior lighting of the appliance on or
1
off.
When the appliance door is opened, the interior
lighting switches off automatically after 10
minutes.
Switch the front display on or off.
Set a default programme for when the appliance
is switched on.
Set the signal volume at the end of the pro-
gramme.
Level 0 switches the signal tones off.
Set the button volume during operation.
Level 0 switches the button tones off.
Switch the wireless network connection on or off.
The basic setting "Wi-Fi" is only available once
the appliance is connected to the Home Connect
app.
→ "Home Connect ", Page 39
Activate or deactivate
→ "Remote Start
This basic setting is not available until after you
have connected the device with the Home Con-
nect app.
→ "Home Connect ", Page 39
Switch display of the brand name logo on or off
when the appliance is switched on.
Restore changed settings to the factory settings.
The settings for initial start-up must be con-
figured.
To save the settings, press
5.
approx. 3 seconds.

Setting the time

To open the basic settings, press
1.
for approx. 3 seconds.
Press
2.
shows "Time setting".
Press
3.
display shows the required time.
", Page 40.
repeatedly until the display
or repeatedly until the
for