Hardware - Inepro Spider RFID Reader Technical Manual

Test

Hardware

Physical test Inepro Spider RFID Reader
1. Connect the Inepro Spider RFID Reader to the USB port of a computer.
2. Check the indicator LED's to see if the board is operating as it should.
Blue Led burning:
Reader is powered and has
connection
This concludes the hardware test
Pondweg 7 | 2153 PK, Nieuw-Vennep | The Netherlands | +31 252 744044 | info@inepro.com |
Put a card on the Spider RFID
Reader:
Besides the blue power LED, the
yellow and the green LED should lit.
Yellow: card detected
Green: card recognised.
Hardware
inepro.com