Troubleshooting
In this Appendix
Troubleshooting Checklist
Windows NT Troubleshooting
Troubleshooting Checklist
Check the following if you have problems installing or running the
AAA-131U2/133U2 and SCSI devices:
Does the AAA-131U2/133U2 BIOS sign-on message appear
during bootup? If not, check the following items:
–
Is the AAA-131U2/133U2 properly seated in a PCI
expansion slot? Refer to your computer documentation for
the slot location.
–
Does your computer CMOS setup require you to enable
PCI bus parameters (see your computer documentation)? If
so, run the CMOS Setup program and assign the parame-
ters—usually IRQ, Enable PCI Slot, and Enable Master.
Is the SCSI bus terminated properly, and are all SCSI devices
turned on?
Are all SCSI bus cables and power cables connected?
%
B-1
B-2
B-1