Driver Installation For Windows Xp - ACTiSYS IR2000UL User Manual

6 DRIVER INSTALLATION FOR WINDOWS XP

Following are the instructions to properly install ACT-IR2000UL Series under Windows XP.
NOT
Important: Do
smooth installation. If you have plugged ACT-IR2000UL into USB port and mistakenly loaded
WindowsXP Native Driver, please refer to the "IR2000UL WindowsXP Native Driver Remove Procedure"
to remove the driver and follow the "ACTiSYS ACT-IR2000UL Series Driver Installation for Windows XP" to
re-install the driver.
1. Insert the attached CD to
CD-ROM, Windows will
display install manual.
Please click Installation,
then execute InstallShield
Wizard. Please Click on
Next to continue.
2. The Installer will install
ACTiSYS
ACT-IR2000UL in the
Destination Folder. To
install to a different
folder, click Browse and
select one. To continue,
click on Next.
© Copyright 2002-2007 ACTiSYS Corp.
The Infrared Wireless Expert
use Windows' Native Driver. Please
use the driver on this CD
Page 8 of 20
ACT-IR2000UL
User's Manual
to assure a
Jul 6, 2007
Version. 1.6