Operation; Cordless 1-Line - Ctm-A2415; Cordless Accessory Handset & Charging Stand - Ctm-A2415Hc - VTech Analog Contemporary Series Master User Manual

Operation

Cordless 1-line - CTM-A2415

Cordless Accessory Handset & Charging
stand - CTM-A2415HC
Using the cordless handset and the
telephone base
The cordless handset and the telephone
base cannot be used on the same call.
However, calls can be switched between the
cordless handset and the telephone base
speakerphone.
When the cordless handset or the telephone
base is in use, the TALK key on the cordless
handset or the SPEAKER LED on the telephone
base illuminate.
Receive a call
The telephone rings when there is an incoming
call. The MESSAGE WAITING LEDs flash.
Answer a call using the cordless handset
while it is not on the telephone base or
charging base
On the cordless handset, press TALK or
SPEAKER.
• The TALK key illuminates when in use.
The / SPEAKER key illuminates when in
speakerphone mode.
Answer a call using the cordless handset
while it is cradled on the telephone base
or charging base
Lift the cordless handset from the telephone
base or charging base.
• The TALK key illuminates when in use.
The / SPEAKER key illuminates when in
speakerphone mode.
Answer a call using the telephone base
On the telephone base, press
• The / SPEAKER key illuminates when in
use.
Place a call
Place a call using the cordless handset
On the cordless handset, press TALK or
SPEAKER. Listen for a dial tone and then dial
the desired number, or press a Speed Dial key
on the telephone base to dial a programmed
number.
• The TALK key illuminates when in use.
/ SPEAKER key illuminates when in
The
speakerphone mode.
Place a call using the telephone base
On the telephone base, press
Listen for a dial tone and then press a Speed
Dial key on the telephone base to dial a
programmed number.
• The / SPEAKER key illuminates when in
use.
/
End a call
End a call when using the cordless
handset
Press OFF on the cordless handset or place it in
the telephone base or charging base. The call
ends when all handsets hang up.
End a call when using the telephone base
/ SPEAKER.
Press
Switch a call between the cordless
handset and the telephone base
speakerphone
• To switch a call from the cordless handset
to the telephone base speakerphone,
press
SPEAKER on the telephone base.
EN - 17
/ SPEAKER.
/
/ SPEAKER.