VTech Analog Contemporary Series Master User Manual page 16

To change the voicemail voltage detection
by the Panasonic detection method
1. Press *7764#MUTE on the handset to enter
ADMIN mode.
2. Press 14. Then, press a dialing key,
0 (disable) or 1 (enable), to select the
desired setting. You hear 3 rising beeps as
confirmation.
To change the voicemail voltage detection
by the Siemens detection method
1. Press *7764#MUTE on the handset to enter
ADMIN mode.
2. Press 13. Then, press a dialing key, 0
(disable), 1 (50Hz), 2 (25Hz), or 3 (20Hz),to select
the desired setting. You hear 3 rising beeps as
confirmation.
Speed Dial keys
This telephone has up to 8 programmable
guest-service (Speed Dial) keys. Program these
keys to automatically dial telephone numbers
or to activate telephone system features.
Examples for CTM-A2415
Speed Faceplate with Speed
dial key dial key
SPD5
FRONT DESK
SPD6
ROOM SERVICE
SPD7
MESSAGE
SPD8
EMERGENCY
Examples for CTM-A2415HC
Speed
Sticker for Speed dial key
Dial keys
SPD1
FRONT DESK
SPD2
ROOM SERVICE
EMERGENCY
MESSAGES
To program a Speed Dial key
1. Press *234636#MUTE on the handset to
enter SPEED DIAL PROGRAMMING mode. You
hear 3 beeps while MUTE key (on handset) and
all LEDs (on base) are flashing.
2. Press the desired Speed Dial key where
the telephone number is to be stored.
3. Enter the telephone number (up to
32 digits). Press the same Speed Dial key
to confirm. You hear 3 rising beeps as
confirmation.
• To insert a pause in the stored number, press
the SPEAKER key on the handset.
• The telephone can store maximum 32 digits.
4. To program other Speed Dial keys, repeat
steps 2 and 3.
5. Press OFF key to quit SPEED DIAL
PROGRAMMING mode.
To clear the programmed Speed Dial key
1. Press *234636#MUTE on the handset to
enter SPEED DIAL PROGRAMMING mode.
2. Press the Speed Dial key twice where the
telephone number is to be deleted. You hear 3
rising beeps as confirmation.
Speed
dial value
(default)
24106
24107
24111
24105
Speed
dial value
(default)
24106
24107
24105
24111
EN - 16