V-ZUG Combair V2000 Operating Instructions Manual page 45

9 Trouble-shooting
You may be able to trouble-shoot the following malfunctions yourself. If not, note down
the error message in full (message, F and E numbers) and call Customer Services.
9.1 Error messages
Message
▪ «FX/EXX»
▪ «UX/EXX»
9.2 Other possible problems
Message
▪ Appliance is
not working
Possible cause
▪ Various situations can
lead to an error mes-
sage.
▪ Interruption in the
power supply.
Possible cause
▪ A household fuse or
circuit breaker has
tripped.
▪ The fuse or circuit
breaker keeps blow-
ing.
▪ Interruption in the
power supply.
▪ Demo mode is
switched on.
▪ Appliance is faulty.
Solution
▸ Acknowledge the error message by
touching «OK».
▸ Switch the power supply off for about
1 minute.
▸ Switch the power supply back on.
▸ If the error appears again, note down
the error message in full along with
the serial number (SN) (see page
47).
▸ Disconnect from the power supply.
▸ Contact Customer Services.
▸ Acknowledge the error message by
touching «OK».
▸ Switch the power supply off for about
1 minute.
▸ Switch the power supply back on.
▸ If the error appears again, note down
the error message in full along with
the serial number (SN) (see page
47).
▸ Disconnect from the power supply.
▸ Contact Customer Services.
Solution
▸ Change the fuse.
▸ Reset the circuit breaker.
▸ Contact Customer Services.
▸ Check the power supply.
The demo mode can only be switched
off with the security code.
▸ Contact Customer Services.
▸ Contact Customer Services.
9 Trouble-shooting
45