V-ZUG Combair V2000 Operating Instructions Manual page 44

8 Care and maintenance
Overhead illumination
▸ Carefully turn the glass light cover 1 clockwise
and remove.
▸ Take out the faulty halogen light bulb.
▸ Carefully fit the new halogen light bulb.
▸ Turn the glass light cover 1 anti-clockwise to
tighten.
▸ Reconnect the power supply.
Lateral illumination
▸ Remove the left shelf guide.
▸ Place the screw driver along the middle of the
edge of the glass and carefully remove the
glass light cover 2 from its fixture.
▸ Take out the faulty halogen light bulb.
▸ Carefully fit the new halogen light bulb.
▸ Press the glass light cover 2 back into its fix-
ture.
▸ Replace the shelf guides.
▸ Reconnect the power supply.
8.7 Cleaning the accessories and shelf guides
▪ The wire shelf and shelf guides can be cleaned in the dishwasher.
▪ The baking tray can be cleaned in the dishwasher; however, this will affect its non-
stick properties.
Removing and putting back the shelf guides
When inserting the shelf guides take care not to damage the enamel.
▸ Swing the shelf guide at the front into the
middle of the cooking space.
▸ Take the shelf guide out of the opening at the
back.
▸ Put back in reverse order.
44
1
2