Table of Contents
Advertisement
4-14. SAVE & EXIT SETUP
After you have completed adjusting all the settings as required, you must
remember to save these setting into the CMOS RAM. To save the settings,
select "SAVE & EXIT SETUP" and press <Enter>, a display will be shown
as follows:
ŹStandard CMOS Features
ŹAdvanced BIOS Features
ŹAdvanced Chipset Features
ŹIntegrated Peripherals
ŹPower Management
ŹPnP/PCI Configura
ŹPC Health Status
Esc : Quit
F10 : Save & Exit Setup
When you confirm that you wish to save the settings, your system will be
automatically restarted and the changes you have made will be implemented.
You may always call up the setup program at any time to adjust any of the
individual items by pressing the <Del> key during boot up.
PC 5151 USER MANUAL
Phoenix - AwardBIOS CMOS Setup Utility
ŹFrequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Save to CMOS and EXIT Y/N)? Y
F9 : Menu in BIOS
Save Data to CMOS
Chapter 4 Award BIOS Setup
word
etup
Saving
npom
: Select Item
Page: 4-27
Advertisement
Table of Contents
