Table of Contents
Advertisement
Chapter 3 Software Configuration
3-3. FLASH BIOS UPDATE
3-3-1. System BIOS Update:
Users of PC 5151 can use the program "Awdflash.exe" contained in
the Utility Disk for system BIOS and VGA BIOS update.
3-3-2. To update VGA BIOS for LCD Flat Panel Display:
As PC 5151 user, you have to update the VGA BIOS for your specific
LCD flat panel you are going to use. For doing this, you need two files.
One is the "Awdflash.exe" file and the other is the VGA BIOS for ATI
Rage Mobility M6 file for LCD panel display. Both file must be
provided by the vendor or manufacturer. When you get these two files
ready, follow the following steps for updating your VGA BIOS:
1. Install "Awdflash.exe" from Utility Disk to Drive C.
2. Insert the VGA BIOS file you have obtained from the vendor.
Type the path to Awdflash.exe and execute the VGA BIOS update
with file H15bxxxx.bin
3. C:\UTIL\AWDFLASH>AWDFLASH H15bxxxx.bin
4. The screen will display as the table fount on the next page:
(C) Award Software 2001 All Rights Reserved
Error Message: Do You Want To Save BIOS (Y/N)
If you want to save up the original BIOS, enter "Y" and press < Enter >.
If you choose "N", the following table will appear on screen.
Page:3-4
FLASH MEMORY WRITER v8.XX
Flash Type – SST 49LF004A /3.3V
H20bxxxx.bin
File Name to Program:
Checksum: XXXXX
PC 5151 USER ' S MANUAL
Advertisement
Table of Contents
