Save & Exit Setup - Acnodes PC 8150 User Manual

PC 8150 User's Manual
To disable the password, just press <Enter> when you are prompted
to enter a password. A message will confirm the password is getting
disabled. Once the password is disabled, the system will boot and you
can enter Setup freely.
PASSWORD DISABLED
When a password is enabled, you have to type it every time you enter
the Setup. It prevents any unauthorized persons from changing your
system configuration.
A.15 Save & Exit Setup
This section allows you to determine whether or not to accept your
modifications. Type "Y" to quit the setup utility and save all changes
into the CMOS memory. Type "N" to bring you back to the Setup utility.
Appendix
53