Reset/Nmi/Clear Watchdog Selection - Acnodes PC 5151 User Manual

Socket 478 (p4/p4-m) 15” 1024x768 panel pc system
Hide thumbs Also See for PC 5151:
Table of Contents

Advertisement

Chapter 2 Hardware Configuration
2-29. RESET / NMI /CLEAR WATCHDOG SELECTION
JP6 : Reset/NMI/Clear Watchdog Selection
The selections are as follows:
FUNCTION
Reset
NMI
Watchdog
*** Manufacturing Default --- is set as Reset.
User may select to use the Reset or NMI watchdog. NMI, also known as Non-Maskable
Interrupt, is used for serious conditions that demand the processor's immediate attention, it
cannot be ignored by the system unless it is shut off specifically. To clear NMI
command, user should short the "Clear Watchdog" pin via push button.
Page: 2-30
JUMPER SETTING
1-2
3-4
5-6
PC 5151 USER
JUMPER
ILLUSTRATION
'
S MANUAL

Advertisement

Table of Contents
loading

Table of Contents