Entering Setup - Acnodes PC 5151 User Manual

4-2. ENTERING SETUP

When the system is powered on, the BIOS will enter the Power-On Self
Test (POST) routines and the following message will appear on the lower
screen:
PRESS <DEL> TO ENTER SETUP, ESC TO SKIP MEMORY TEST
As long as this message is present on the screen you may press the <Del>
key (the one that shares the decimal point at the bottom of the number
keypad) to access the Setup program. In a moment, the main menu of the
Award SETUP program will appear on the screen:
ŹStandard CMOS Features
ŹAdvanced BIOS Features
ŹAdvanced Chipset Features
ŹIntegrated Peripherals
ŹPower Management Setup
ŹPnP/PCI Configurations
ŹPC Health Status
Esc : Quit
F10 : Save & Exit Setup
You may use the cursor the up/down keys to highlight the individual menu
items. As you highlight each item, a brief description of the highlighted
selection will appear at the bottom of the screen.
PC 5151 USER MANUAL
Phoenix - AwardBIOS CMOS Setup Utility
ŹFrequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
npom
Time, Date, Hard Disk Type ....
Setup program initial screen
Chapter 4 Award BIOS Setup
: Select Item
Page: 4-3