Bayer HealthCare Clinitek Status Operator's Manual page 41

4 Testing
Full Tests
The next screen displayed is
Patient Information.
There are two options under Patient
Information: Recall Patient or
Enter New Patient.
Option 1: Recall Patient
In order to look up previous
patients, touch Recall Patient.
If previous patient identification has
been entered, a list of up to 200
patient results will appear on the
screen. Use the up and down arrow
buttons to scroll through the list of
patients. The most recently
performed test will be shown at the
top. Once the patient is highlighted,
touch Select button.
The next screen will be Prepare
Test.
A total of 200 patient tests can
be stored in the analyzer. The tests
are listed in chronological order.
When the limit of 200 has been
reached, the oldest test will be
deleted from the analyzer. Deleted
information cannot be retrieved from
the analyzer.
132387 Rev. B, 2004-10
4-13