2. Select Stay, Away, Sleeping or Custom.
3. Enter the arm/disarm password to enable the scene.
Note
You can set the arm/disarm password in the general settings. For details, see the
configuration guide.
4. Tap OK.
Note
You can also tap
page to enable the scene.
2.4.2 Disarm Room
Steps
1. Tap
→ One-Push to Disarm at the upper-right corner of the home page to
disarm.
Network Indoor Station Operation Guide
Figure 2-5 Arm Settings page
→ One-Push to Arm at the upper right corner of the home
7