ZKTeco D1s Quick Start Manual

Download this manual

D1s & D2s Quick Start Guide

Version: 1.1

Date: Apr. 2018

1. Overview

D1s

D2s

2. Power on the Device

Place a finger on the fingerprint sensor or press the /◄ key to turn on the device. If

there is no any further operation within three seconds, the device will automatically enter

the stand-by mode.

Notes of Battery Charging:

1. We recommend using the official power adaptor. If you use a different power adaptor,

please ensure that it is a 5V 2A adaptor.

2. Shorter cable will help reduce charging time. Generally, it takes about 8 to 10 hours to

fully charge the power bank.

3. Do not charge the device near fumes and humid environment or cover the device

when it is charging.

Page 1 D1s & D2s Quick Start Guide Version: 1.1 Date: Apr. 2018 1. Overview 2. Power on the Device Place a finger on the fingerprint sensor or press the /◄ key to turn on the device. If there is no any further operation within three seconds, the device will automatically enter the stand-by mode.
Page 2 3. Date/Time Setting Press M/OK > Date Time to enter the Date Time interface. 4. Adding User Press M/OK > User Mgt. > Add User to enter the Add User interface, enter User ID, Name, modify User Role (Administrator/ User), enroll fingerprint/ password. Press M/OK on the initial interface.
Page 3 6. Quick Query of Attendance Records Users may take a look at their attendance records on the current day and check to see if there is any missing or incorrect record. Users may therefore be able to timely notify the administrator of certain wrong records.
Page 4 7. Download/Upload Insert an USB device into the USB host of the device. Select Download Attlog Downloading… Data is downloaded. then press M/OK. Download Attlog (Download attendance data): Download all the attendance data from the device to the USB device. Download User (Download user data): Download all user information and fingerprint templates from the device to a USB drive or an SD card.

D2s