Xvme-212 Module Specifications - Xycom XVME-212 Manual

XVME-2 12 Manual
August, 1989
- Module identification - The XVME-212 has ID information which provides its name,
model number, manufacturer, and revision level at a location that is consistent
other Xycom I/O modules.
- Status/Control
the lower four bits (two Test Status bits, and a red and green LED bit) are standard
from module to module.
A detailed description of Xycom I/O Architecture is presented in Appendix A at the rear
of this manual.

XVME-212 MODULE SPECIFICATIONS

1.5
Of f-to-on
On-to-off
Positive pulse
Negative pulse
Debounce Time
Reverse Bias Protection (XVME-212/l)
Reverse Bias Protection (XVME-2 12/2) - 6.5V max.
Power Requirements
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Register - This register is always located at address base + 8 lH, and
Table l-l. XVME-2 12 Module Specifications
12/ 1)
Specification
3 2
+5OV DC max.
Logic 1 -- 10 to 5OV DC
Logic 0 -- 0 to lV DC
Typical t h r e s h o l d 3 V
+65V DC max.
Logic 1 -- 2 to 6.5V DC
Logic 0 -- 0 to 0.8V DC
Typical threshold -- 1.2V DC
3.9K +5%
330 +5%
100 usec max. (l0-25 usec typ.)
600 usec max. (150 usec typ.)
100 usec max. (l0-25 usec typ.)
600 usec max. (150 usec typ.)
3.4 KHz typical
Jumper-selectable from 4.5 usec to 18 msec
(8 possible settings)
- 50 V max.
+5V, 25% 1.7 Amp typ., 2.0 Amp max.
1-3
with
- - DC