ANZ HealthPay Operating Manual page 32

LSPN
The LSPN option is presented if the service provided is not pathology.
For services that are not diagnostic, the default is for no LSPN. For a diagnostic service this
field is mandatory and has no default. The current LSPN is displayed on the right of this line
('N/A' indicates that there is no LSPN).
If LSPN Items have been setup (see Section LSPN Setup):
• Select this option. The ANZ HealthPay terminal will show the LSPN List
• Select the LSPN or N/A from the list
• If the required LSPN has not been added previously select SEARCH option, key in the
LSPN and press ENTER.
Note: The 'N/A' option is unavailable if Service = Diagnostics.
If LSPN Items have not been setup:
• Select this option. Key in the LSPN or leave the field blank (for N/A) and press ENTER.
Note: This cannot be left blank if Service = Diagnostics.
Substituted Service
The Substituted Service option is presented if the service provided is diagnostic and a
Requesting Provider was supplied.
The default value is 'No', indicated by an 'N' in the right column of this line. If the value is
changed to 'Yes', this is represented by a 'Y' in the right column.
• Select this option then select YES or NO.
Equipment ID
The Equipment ID option is presented if the service provided is diagnostic.
The default value is 'N/A'. The current Equipment ID is displayed on the right of this line
('N/A' indicates that there is no Equipment ID).
If Equipment Items have been setup (see Section Equipment Setup):
• Select this option. The ANZ HealthPay terminal will show the Equipment ID List
• Select the Equipment ID or N/A from the list
• If the required Equipment ID has not been added previously select SEARCH option, key
in the Equipment ID and press ENTER.
If Equipment Items have not been setup:
• Select this option. Key in the Equipment ID or leave the field blank (for N/A) and
press ENTER.