And Specifications; Nameplate Data - GE Fuji Electric MICRO-SAVER AF-300 Instructions Manual

S e c t i o n 2
The AF900M$ Drive is avarlable In ratrngs of l/4 to 3 hp 200-230 Vat single phase and l/4 to 5 hp 230 & 460 Vat
three phase. The AF600M$ Drive incorporates sinusordral PWM Scalar power control with automatrc voltage
regulator function. The AFSOOM$
and all Drives are furnished with a detachable cover to allow ease of accessing control and power wrnng.
Drive operation and Function Code setting
and 6 dual function keys. The 6 dual function keys are used for Drive programming and operation
General data and specrfrcation
Refer to TABLE 1, page 2-4 for complete AF-300M$
Upon receipt of your Drive, inspect the equipment for the followrng
1. Check the nameplate to insure that the specrfrcations
ordered, and to applicatron
2. Inspect the unit for any damage that may have occurred during shipment.
distributor from which the equipment was purchased
INPUT:
VOLTS
AMPS
FREQ (HZ)
PHASE (S)
I N S T R U C T I O N
BOOK
MODEL NO. 6KAF3 __ ___ M$Al
I D E N T I F I C A T I O N ,
Drives are housed In a NEMA 1 type enclosure for either open or panel mounting
performed from the "Keypad Panel" that features a Digital Monitor Drsplay
IS
for each Drive listed on the nameplate attached to the Drive
IS
INSPECTION PROCEDURES UPON DELIVERY
requirements
found or the wrong Drive
IS
MODEL NO.
SERIAL NO.
OUTPUT
VOLTS
FREQ RANGE (HZ) 0 - 400
HP
AMPS CONT.
PHASE
ROTATION
MAX 60 SEC. AMPS
GEL100313
GE
Motors & lndustrtal Systems, Fort Wayne, IN
1 -Single Phase 3-three phase
All models are UL Listed and CSA Approved
Figure 2-1. NAMEPLATE
D E S C R I P T I O N , C O M P O N E N T
a n d
listing.
correspond to those
received, contact the
IS
Made I" Japan
002 - 2HP
003 - 3 HP
0 0 5 - 5 H P
DATA IDENTIFICATION
2-1
S P E C I F I C A T I O N
items.