To Replace The Rear Body Suspension Parts; To Replace The Front Body Suspension Parts - Husqvarna Automower 405X Workshop Manual

5. Pull the cable and the headlights through the hole in
the body.
6. Remove the screw for the holder of the charging
plates.
7. Lift up and remove the holder.
8. Remove the charging plates from the body.
9. Install in opposite sequence.
22 - Repair instructions
Note: Make sure to put the cables in the cable
holders. To put the cables into position in the body:

6.9 To replace the rear body suspension parts

1. Remove the top cover. Refer to
install the top cover on page 19 .
2. Remove the body. Refer to
the body on page 19 .
3. Fold the rear body suspension part.
4. Lift up to remove.
5. Install in the opposite sequence.
6.10 To replace the front body suspension
parts
1. Remove the top cover. Refer to
install the top cover on page 19 .
2. Remove the body. Refer to
the body on page 19 .
To remove and
To remove and install
To remove and
To remove and install
1582 - 001 - 23.12.2020