Chapter 4. Applications
10BaseT Ethernet
Router
NMS
Minimum Configuration Requirements for Out-of-Band Management
The following options (all found in the SYSTEM portion of the
CONFIGURATION menu) are the minimum configuration
requirements for establishing out-of-band SNMP or TELNET
access. Once these options are configured, the unit may be
accessed using SNMP/TELNET.
Control Port Mode
If necessary, select SLIP or PPP as the IQ Probe control port
mode. If ethernet is the interface type, this parameter does not
affect setup.
IP Address
Enter the IQ Probe IP address.
Subnet Mask
Enter the subnet mask number assigned to the network formed
by the IQ Probe and the other FRAD/routers across the frame
relay network. The subnet mask is available from the network
administrator.
2 6
IQ Probe
Frame
Relay
DSU/CSU
Out-of-Band Management Application Example
IQ Probe User Manual
Router
SLIP/PPP
IQ Probe
DSU/CSU
61200214L1-1
Figure 4-2