Table of Contents
Advertisement
Chapter 2. Installation
To prevent possible radio frequency interference emissions, a shielded
cable is required.
LAN 10baseT Interface
This port is an 8-pin modular connector that provides a 10baseT
ethernet local area network (LAN) interface. This LAN interface
is used for SNMP and TELNET control.
Control Port
The IQ Probe has an 8-pin modular jack labeled CONTROL.
The control port provides connection to a VT 100 EIA-232
compatible interface, a device running SLIP protocol, or a device
running Async PPP protocol. An 8-foot cable with adapter
connector provides a standard DB-25 EIA-232 interface. See the
appendix Pinouts for the control port's pin assignments. The
operation of this port is described in the Operation chapter.
1 2
IQ Probe User Manual
61200214L1-1
Advertisement
Table of Contents
