Table of Contents
Advertisement
Figure 8: Positioning the washers and screws
3. Position all washers touching the head of each screw
Note: Please note that the torque specification for the screws is 1~1.25 Nm
(9.0~11.0 lbf in).
4. Tighten all screws so that washers are compressed
5. Ensure the Terminal is stable, and it is not moving
6. Refer to the 3004339-0001 Hughes Quick Start Guide for more details to
install the SIM and bring up the Terminal
7. Refer to the User Guide for further details.
Figure 9: Placing the plate and tightening the screws
Chapter 1 • Installation Instructions
15
H63998 Revision B
Advertisement
Table of Contents
