Determining Where To Install The Terminal; Optional Installation Items; Magnetic Mounting Kit - Hughes EchoStar Mobile 4500 Install Manual

Hide thumbs Also See for EchoStar Mobile 4500:

Table of Contents

Determining where to install the Terminal

Chapter 1 • Installation Instructions

H63998 Revision B

5. Connect the Hughes 4500 Terminal to your computer via Ethernet or the

USB port under the SIM door. Open a web browser and enter the

address 192.168.128.100 (Ethernet) or 169.254.1.1 (USB) to access the

home page of the UT Web User Interface. The many configuration

options are documented in the 4500 User Guide from which can be

downloaded from

http://echostarmobile.com

6. Confirm Internet connectivity via the Ethernet port (the USB port is

restricted to local configuration only) using a browser to access a remote

web site

7. Reinstall the SIM Door and gasket to maintain the water and dust sealing

of the enclosure.

Note: Please note that the torque specification on the SIM door assembly

is 0.68 Nm (6 lbf in).

For your Hughes 4500 Terminal to work correctly, it must be installed in a

location that provides a clear view of the sky in all directions for a vehicular

install and a clear view to the satellite in a fixed install. The terminal does not

need to be pointed but it should be mounted on a roughly horizontal surface.

Please refer to the Hughes catalog and pricelist for the purchase of any optional

installation items.

This kit may be used for mounting the Hughes 4500 Terminal to a horizontal

magnetic flat surface. The mounting kit includes all the parts needed to install

the magnetic mount to the Terminal:

•

One mounting plate with two circular magnets

•

Four screws and four washers, to attach the mounting plate to the

Terminal.

Refer to Chapter 2 for more technical specifications about the screws and the

washers.

Table of Contents