Table of Contents
Advertisement
Optiview Control Center
SECTION 2 - OPTIVIEW™ CONTROL CENTER
Hot Gas Bypass (Enabled / Disabled)
Access Level Required: SERVICE
Enables and Disables the optional Hot Gas Bypass
Control Feature.
Flow Switch
(Software version C.MLM.05.04.xxx and later)
Access Level Required: SERVICE
Used to enter the applicable Flow Switch type. Style
B and later chillers are equipped with Thermal – Type
flow sensors. The referenced software supports either
the Thermal-Type or Paddle-Type sensor. The differ-
ent types connect to different control center inputs.
64
Therefore, the actual type installed must be entered to
allow the program to read the correct input. Service
Technicians refer to OptiView Control Center Service
Instructions (Form 160.81-M1).
Navigation
Home
Access Level Required: VIEW
Causes an instant return to the HOME screen.
Setup
Access Level Required: VIEW
Return to the SETUP screen.
FORM 160.81-O1 (1020)
ISSUE DATE 10/05/2020
JOHNSON CONTROLS
Hide quick links:
Advertisement
Table of Contents
