User Screen; Figure 19 - User Screen - York YR Manual

Optiview Control Center
SECTION 2 - OPTIVIEW™ CONTROL CENTER

FIGURE 19 - USER SCREEN

Overview
This screen allows definition of custom User ID's and
matching passwords. This allows the building admin-
istrator to assign custom passwords to those who are
authorized to maintain the chiller.
Each Custom User value is not linked to a specific
button. Instead, the Change button is pressed which
enables the cursor arrows which are used to highlight
the Custom User parameter the user wishes to modify.
At this point the '√' (Check) button is pressed and the
value may be entered.
Display Only
None
Programmable
System Language
Access Level Required: OPERATOR
Allows the user to define the language for all screens.
The desired language is selected by scrolling through
the list of those available. English is the Default lan-
guage and is selected by pressing the s key when the
dialog box appears during the selection process. The
selected language will not be displayed until after
the user navigates from the USER screen to another
screen.
56

USER SCREEN

Data Display Mode
Access Level Required: OPERATOR
Define the unit system (English or Metric) used by the
chiller display.
Custom User ID (4)
Access Level Required: SERVICE
This allows the user to specify up to four (4) Custom
User ID values. Each User ID will then require a cor-
responding password and User Level. A User ID can
be defined for various maintenance personnel. Service
Technicians refer to OptiView Control Center Service
Instructions (Form 160.81-M1).
Custom User Password (4)
Access Level Required: SERVICE
This allows the user to specify up to four (4) Custom
password values. Each password will then require a
corresponding User ID and User Level. Service Tech-
nicians refer to OptiView Control Center Service In-
structions (Form 160.81-M1).
FORM 160.81-O1 (1020)
ISSUE DATE 10/05/2020
00343VIP
JOHNSON CONTROLS