Sony KDS-70Q006 Service Manual page 4

CableCARD Slot
Speaker Output
Dimensions (W H D)
Mass
Power Consumption
In Use
In Standby
In i.LINK/CableCARD Standby
Supplied Accessories
Remote Control
AA (R6) Batteries
Cleaning Cloth
AC Power Cord
Anti-Static Cleaning Brush
Slot Covers
Owner's Guide
Quick Setup Guide
Warranty
Product Registration Card
Design and specifications are subject to change without notice.
Flashing Indicators on the Front of the TV
LAMP STANDBY TIMER POWER/STANDBY
STD / DUO
PCMCIA Type I/II
25 W (L), 25 W (R), 50 W (Woofer)
1,907 1,19 5
Approx. 124kg
330 W
0.5 W
Less than 30 W
RM-Y914
2 supplied for remote control
1
1
1
4
1
1
1
1
The POWER/STANDBY (green or red) and/or LAMP (red) indicators light
or flash if there is a problem with or change in the condition of the SXRD
projection TV.
The POWER/STANDBY (green) indicator flashes.
The lamp for the light source is ready to turn on.
The POWER/STANDBY (red) indicator flashes three times.
POWER
STD/DUO
The lamp cover is not attached securely. When you secure the lamp
cover, the POWER/STANDBY indicator flashes in red and the SXRD
projection TV enters the standby mode.
The LAMP indicator flashes.
POWER
The lamp for the light source has burned out.
Replace it with a new one.
If the SXRD projection TV does not function properly after correcting the
problems, contact qualified Sony personnel.
K
627 mm
– 3 –
KDS-70Q006
RM-Y914