Dvd Player With Component Video Connectors - Sony KDS-70Q006 Service Manual

Setting Up the SXRD Projection TV
DVD Player with
Component
Video Connectors
48
Use this hookup if:
❑
Your DVD player has component (Y, P
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the DVD player's Y, P
jacks to the SXRD projection TV's Y, P
DVD IN 4 or 5 input.
✍
The Y, P
C and C
B
2
Using an audio cable, connect the DVD player's AUDIO OUT jacks to
the SXRD projection TV's AUDIO IN jacks. Be sure to use the same
row of inputs that you used for the video connection (HD/DVD IN 4 or
5).
DVD player
color-coded to connectors.
✍
To take advantage of the Wide Mode feature, set the DVD player's
aspect ratio to 16:9. For details, refer to the operating instructions
supplied with your DVD player.
and P jacks on your DVD player are sometimes labeled Y,
B R
, or Y, B-Y and R-Y. If so, connect the cables to like colors.
R
Rear of SXRD projection TV
Component video cable
Cables are often
Connect red to red,
white to white, etc.
Audio cable
, P ) jacks.
B R
and P jacks. Use the HD/
B R
Y
P
B
P
R
AUDIO-R
AUDIO-L
and P
B R