Sxrd Projection Tv Front Panel And Connectors; Front Panel - Sony KDS-70Q006 Service Manual

Setting Up the SXRD Projection TV

SXRD Projection TV Front Panel and Connectors

Front Panel

26
LAMP STANDBY
STD / DUO
1 2 3
Item
1 LAMP LED
2 i.LINK STANDBY
LED
3 Memory Stick
indicator
4 Memory Stick slot
5 TIMER LED
6 (IR) Infrared
Receiver
7 POWER/
STANDBY LED
POWER
STD/DUO
TIMER POWER/STANDBY
POWER
4 5 67 8
Description
Lights up in red when the lamp for the light source has
burned out. For details, see "Replacing the Lamp" on
page 20.
When lit in red, indicates that i.LINK Standby is on. For
details, see page 123.
When lit, indicates that the Memory Stick is being read.
(Do not remove the Memory Stick when the indicator is
lit.)
For inserting Memory Stick media to view on your SXRD
projection TV. For details, See "Inserting and Removing a
Memory Stick" on page 84.
When lit, indicates one of the timers is set. When the
timer is set, this LED will remain lit even if the TV set is
turned off. For details, see page 125.
Receives IR signals from the remote control.
Blinks and then lights up in green when the TV set is
turned on. When in standby mode, the LED lights up in
red. The LED does not light up when the AC power cord
is not connected to the outlet. If the red LED blinks
continuously, this may indicate the display unit needs
servicing (see "Contacting Sony" on page 129). When the
red LED blinks only three times, the lamp cover is not
attached securely (see page 23).
C H A N N E L
3
9
#
V O L U M E
3
0
#
T V / V I D E O
qa